RASIS

Silicone foams are the ideal separating agent for hot and cold molding. In this way, before molding, spray silicone spray on the surface of the mold to prevent the adhesion of the molding materials to the mold with the silicone film it creates, and therefore, they are good factors for increasing the life of your mold.

Silicone Rasis sprays are prepared in such a way that they do not cause any effect or corrosion on the mold, and also do not burn or carbonize. This product is completely odorless and speeds up the molding process with its rapid evaporation, and its temperature resistance is 288 degrees Celsius is reached.

The important factor of the low surface tension of Rasis silicone sprays, which is about 0.021n/m and even lower than the surface tension of organic solvents, makes them a very good competitor for their similar products, and finally, according to the FDA laws of Germany, there is no prohibition. Due to the contact of silicone used in Rasis spray with food and sanitary containers, there is no contact.

Features of Rasis silicone sprays (mold):

Getting to know the features of the mold spray will help you to choose the right spray for your needs. These sprays have different features that we will discuss in this part of the article.

The first feature of these sprays is their oily material, which must be taken into account when choosing a mold. Also, because of this oily substance, these sprays are also used as lubricants.

Another important feature of them is their high temperature tolerance. Normally, these sprays can withstand up to two hundred and ninety degrees Celsius and not disappear. This issue makes it possible to use these sprays in molding very hot materials.

Also, these sprays are flammable, and when using them, safety issues must be fully observed to prevent any fire accidents.