• امروز Friday 20 Jul 2018
  • آوا رسیس

    Farsi/Persian (Iran)English (United Kingdom)

    Silicone spray

    E-mail Print PDF

    Silicon Spray

    Silicon spray is an ideal separator agent for all hot and cold moulds. A layer of the spray is applied over the mould surface to form a thin film of silicon over the mould surface and this will prevent the adhesion of the material to the mould which eventually increases the service life of your moulds.

    The Rasis silicon sprays does not cause and deviation in the mould and never burns or carbonizes under hot molding process. The product is completely odorless and increases the molding process by evaporation. The spray rasists up to 288 °C and another important factor with this spray is lesser surface tension of the product which is about 0.021 N/m and this is even lesser than surface tension of organic solvents. This property gives an advantage to the product over all similar products and, based on German FDA regulations, no limitation has been imposed for contact of the material with the foods and cosmetics.

     

     

    Uses:

    As separating agent: is used in plastic injection moulds, extruders, casting industry, resin moulds for ABS, acrylics, waxes, rubber, polyester, cellulose, polystyrene, polyamide, PVC and packing industries.

    As lubrication agent: Is used in plastic moving parts and fittings, films, rails, and signage, cutting tools, material injection and extrusion, model manufacturing, yarn and fabric industries.

    As water removal and polishing agent: Is used for polishing the decorative surfaces such as dashboards and driver’s cabin, home appliances, glass, ceramic, laminates, insulators, rubbers and painted surfaces.

    Instructions for Application:

    Shake the spray well and apply to the surface from 20-30 cm distance.

    Packing:

    The product is packed in 400 and 300 ml sprays and each carton contains 24 sprays.

    Storage:

    The product should be stored under 50 °C and protected against direct sunshine, spark and frame in a dray place; the minimum shelf life of the product is 24 months. The product will be suitable for use for several years if stored under optimum conditions.

    By taking into account the use of qualitative raw materials supplied by European suppliers, application of high-level QA and QC process, we guarantee the homogeneity of our product. Based on the two above principle and by application of our technology and laboratory equipment we are able to supply homogenous product suitable for our customers’ use.

    All information provided in this site are indicative only and the end user shall be responsible for correct use and application of the products

     

     

     

    Tags:     Production spray
    Latest Articles